Effective AbrasivePolish for professional users in paint shops and for used vehicle valeting. Apply with a rotational speed regulated polishing machine. Removes dust occlusion, paint overspray and sanding marks. Ideal for restoring sanded paintwork, removes sanding grooves from P1500 abrasive paper or finer. High abrasion with simultaneous high shine effect, especially on scratch resistant Paint. Low dust, quick removal of residues.  

Performance scale:

Cut: 5/6

Gloss: 5/6

Keep out of the reach of children!

Directions for Use:

• sand the paint if necessary and wipe off
• Shake bottle/ tube well before use.
• Apply a small amount of SONAX Cut & Finish onto the sanded spot and polish with a lambskin pad at the lowest rotational speed (ca. 800 rpm) for 10 sec, exerting some pressure. You can tilt the machine a little bit.
• After that time guide it swiftly over the surface for 20 sec max. and complete the  polishing. Now exerting only moderate pressure.
• Remove the polish residue with a microfibre cloth.
• Afterwards, polish with SONAX Perfect Finish (Art. No. 224 300) and sponge pad to a deep glossy and hologram-free finish.

Please Note:

• The yellow polishing pad (493 100) may be used as an alternative.
• Keep polishing time short, avoid hot polishing!
• Protect against extreme cold.